You are here:
Home » Page 12
HSRP (Hot Standby Router Protocol) is one of the most popular First Hop Redundancy Protocols (FHRP) made by Cisco. It is Cisco proprietary protocol. The FHRP allows a router on a LAN segment to automatically take over if other fails. Today, in this lesson, we will learn to configure HSRP…
continue reading →
In this lesson, we will learn how to Configure Juniper SRX as a beginner. We will configure it as our network gateway. We will perform the following activities and it will be updated day by day. So, let's begin with below network topology. If we login to the new SRX…
continue reading →
A VLAN (virtual LAN) is a logical sub-networks of workstation. This is needed for network admin to partition a single switch network into many. It improves security and traffic management. In this lesson we will learn how to configure VLAN on Cisco Catalyst switches. We will start with a simple…
continue reading →
A variety of risks exist when deploying a routing protocol in a network. It's very much true for OSPF. It's because, OSPF does not have any built in authentication mechanism for peers. You need to configure OSPF Authentication, to make your neighbor establishment secure. Today we will configure OSPF authentication…
continue reading →
OSPF (Open shortest path first) is an open standard routing protocol, meaning any vendor like Cisco, Juniper, Brocade can implement its features. Today we will discuss how to configure OSPF in Cisco routers. To do so, first we need to enable OSPF in our router. To enable OSPF, we have…
continue reading →
