There are many ways to advertise BGP routes in Juniper. Today we will learn a few of those. This is the 3rd article on Juniper BGP series. You can check other articles of this series from below list. This list […]
In this lesson, we will configure iBGP on Juniper Router. This is the second part of our JunOS BGP series. A network topology with three routers is chosen for today’s lab. We will configure ibgp among them and check the
Today, we will learn to configure eBGP on Juniper Router. We will be using a simple point-to-point topology to keep the tutorial simple and to the point. So, let’s get started. Every BGP configuration is done by following 2 steps.
In this lesson, we will configure iBGP on Cisco Router. This is the second part of our BGP series. We have chosen a network where we have three routers which are not directly connected. We will configure ibgp among them
BGP is an exterior gateway protocol that manages how packets are routed across the internet. It can quickly adapt to send out packets if a path goes down. Because of the variety of ways to do the traffic engineering, this
In this lesson, we will learn how to Configure Juniper SRX as a beginner. We will configure it as our network gateway. We will perform the following activities and it will be updated day by day. So, let’s begin with
