You are here: Home » Junos
In this lesson, we will configure iBGP on Juniper Router. This is the second part of our JunOS BGP series. A network topology with three routers is chosen for today's lab. We will configure ibgp among them and check the reachability from end to end. Below are the list of…
continue reading → Today, we will learn to configure eBGP on Juniper Router. We will be using a simple point-to-point topology to keep the tutorial simple and to the point. So, let's get started. Every BGP configuration is done by following 2 steps. In first step, we need to tell, who we are…
continue reading → Recovering Root Password for Juniper Devices can be done in few simple steps. In this lesson, we will learn how to recover Root Password on Juniper devices. This procedure is applicable for Juniper MX, M, EX, SRX, ACX, T, and PTX series devices. We will do the recovery in 7…
continue reading → Earlier we discussed, how to configure policy-based IPSec vpn on Juniper SRX and now we are going to discuss about route based IPSec. So, in this lesson, I will be discussing, how to configure Site-to-Site Route based IPSec VPN on Juniper SRX. VPN Details: VPN NegotiationParameters: Configuration: Let's assume, everything…
continue reading → Generic Routing Encapsulation (GRE) is a tunneling protocol that was developed to carry L3 traffic over an IP network. It encapsulates packets in a manner, so that it creates a private point-to-point link between 2 networks. In this lesson, we will learn how to configure a GRE on Juniper devices.…
continue reading → 