Hello everyone! Today’s topic is, how to configure Telnet on your Cisco IOS devices. If you are not familiar with Telnet, read this WIKI page. By the end of this article, you will be confident enough to configure and troubleshoot […]
Today we will learn Best Practices for VPC on Cisco Nexus switches. Before going in deep, you should understand, what is vPC? Virtual Port-Channel (vPC) is a technology that allows links to be physically connected with two different devices to
Welcome back everyone. Today, i will be sharing, how to install Palo Alto firewall on EVE-NG. I will be deploying PAN-OS version 9.0.1. So, let’s get started. Hardware requirements According Palo Alto Website: If you check the Palo Alto website,
There are many ways to advertise BGP routes in Juniper. Today we will learn a few of those. This is the 3rd article on Juniper BGP series. You can check other articles of this series from below list. This list
In this lesson, we will configure iBGP on Juniper Router. This is the second part of our JunOS BGP series. A network topology with three routers is chosen for today’s lab. We will configure ibgp among them and check the
Today, we will learn to configure eBGP on Juniper Router. We will be using a simple point-to-point topology to keep the tutorial simple and to the point. So, let’s get started. Every BGP configuration is done by following 2 steps.
