You are here: Home » Configure
Breakout is a mechanism to divide a high bandwidth interface into smaller bandwidth interfaces. Cisco Nexus switches support the breakout of high bandwidth interfaces at the module level or at the per-port level. In this lesson we will learn how to Configuring Interfaces Breakout in Nexus. So, we can split…
continue reading → In this lesson, we will configure SSH on Cisco IOS XR enabled router. Earlier we have configured SSH on Cisco IOS, if you want to check that article, then click SSH on Cisco IOS devices. SSH on Cisco IOS XR First of all, you should create hostname and domain name…
continue reading → - Posted on September 18, 2018
- /Under Cisco
In this lesson, we will learn how to configure SSH on Cisco IOS enabled devices. This tutorial will show you how to enable SSH, generating RSA key, and then allowing on SSH remote management protocol under the VTY interfaces. This will also show you how to add more security in…
continue reading → Earlier, we have learned, how to configure OSPF on CISCO routers. Today, in this lesson, we will learn how to configure OSPF on Juniper. This process is same for MX, ACX, SRX, EX, and other Junos enabled devices. We will be using following topology for our LAB. So, let's config…
continue reading → A VLAN (virtual LAN) is a logical sub-networks of workstation. This is needed for network admin to partition a single switch network into many. It improves security and traffic management. In this lesson we will learn how to configure VLAN on Cisco Catalyst switches. We will start with a simple…
continue reading → 